Last updated: 2018-06-22

workflowr checks: (Click a bullet for more information)
  • R Markdown file: up-to-date

    Great! Since the R Markdown file has been committed to the Git repository, you know the exact version of the code that produced these results.

  • Environment: empty

    Great job! The global environment was empty. Objects defined in the global environment can affect the analysis in your R Markdown file in unknown ways. For reproduciblity it’s best to always run the code in an empty environment.

  • Seed: set.seed(1)

    The command set.seed(1) was run prior to running the code in the R Markdown file. Setting a seed ensures that any results that rely on randomness, e.g. subsampling or permutations, are reproducible.

  • Session information: recorded

    Great job! Recording the operating system, R version, and package versions is critical for reproducibility.

  • Repository version: 5afe6c0

    Great! You are using Git for version control. Tracking code development and connecting the code version to the results is critical for reproducibility. The version displayed above was the version of the Git repository at the time these results were generated.

    Note that you need to be careful to ensure that all relevant files for the analysis have been committed to Git prior to generating the results (you can use wflow_publish or wflow_git_commit). workflowr only checks the R Markdown file, but you know if there are other scripts or data files that it depends on. Below is the status of the Git repository when the results were generated:
    
    Untracked files:
        Untracked:  output/44binary.txt.gz
        Untracked:  output/bmaonlybetasd5lfsr.txt.gz
        Untracked:  output/bmaonlybetasd5posterior.means.txt.gz
        Untracked:  output/independentsim.rds
        Untracked:  output/independentsimesd05.rds
        Untracked:  output/independentsiminputdata
        Untracked:  output/independenttest.txt
        Untracked:  output/indsim05sdlfsr.txt.gz
        Untracked:  output/indsim05sdposterior.means.txt.gz
        Untracked:  output/logBFTABLEapril.txt
        Untracked:  output/noashsharedwithzerobmaalllfsr.txt.gz
        Untracked:  output/noashsharedwithzerobmaallposterior.means.txt.gz
        Untracked:  output/sharedashcutoffomega2jun15lfsr.txt.gz
        Untracked:  output/sharedashcutoffomega2jun15posterior.means.txt.gz
        Untracked:  output/sharedtest
        Untracked:  output/simdata.rds
        Untracked:  output/univariate.ash.lfsr.txt.gz
        Untracked:  output/univariate.ash.pm.txt.gz
        Untracked:  output/univariate.ash.pmindesd.txt.gz
        Untracked:  output/univariate.ashind.lfsresd.txt.gz
    
    
    Note that any generated files, e.g. HTML, png, CSS, etc., are not included in this status report because it is ok for generated content to have uncommitted changes.
Expand here to see past versions:
    File Version Author Date Message
    html 3ab329f Peter Carbonetto 2018-06-18 Build site.
    Rmd 70b3ae5 Gao Wang 2018-06-16 Fix misplaced strong.s labels
    Rmd 6314ce0 Gao Wang 2018-06-16 Relabel ‘test’ to ‘strong’ in data and code
    html 6eee6a9 Peter Carbonetto 2018-06-06 Updated the webpages for a bunch of R Markdown files after minor revisions.
    Rmd 7fec23c Peter Carbonetto 2018-06-06 Renamed Tspecific analysis.
    html ab91f2e Peter Carbonetto 2018-06-06 I’ve completed a rewrite of the “tissue effective sample sizes”
    Rmd 3823c99 Peter Carbonetto 2018-06-06 wflow_publish(“SampleSize.Rmd”)
    html 6f66a94 Peter Carbonetto 2018-06-06 Re-built revised SampleSize page.
    Rmd 324f27b Peter Carbonetto 2018-06-06 wflow_publish(“SampleSize.Rmd”)
    Rmd f6f3914 Peter Carbonetto 2018-06-06 Code in SampleSize.Rmd now runs successfully; need to polish it up.
    html aecc7f1 Peter Carbonetto 2017-09-20 Moved doc to docs.
    Rmd 7072cdb Peter Carbonetto 2017-09-20 Reorganized many of the files.


Different levels of effect sharing among tissues means that effect estimates in some tissues gain more precision than others from the joint analysis. Here we quantify an “effective sample size” (ESS) per tissue and compare against the actual sample sizes.

Compare the last plot, at the bottom of this page, against Supplementary Figure 1 in the manuscript.

Load data and mash results

Load some of the results generated from the mas analysis of the GTEx data, as well as summary statistics (e.g., sample sizes, standard errors) calculated from the raw GTEx data.

missing.tissues <- c(7,8,19,20,24,25,31,34,37)
out     <- readRDS("../data/MatrixEQTLSumStats.Portable.Z.rds")
maxz    <- out$strong.z
maxbeta <- out$strong.b
qtl.names <- sapply(1:length(rownames(maxz)),
  function(x) unlist(strsplit(rownames(maxz)[x],"[_]"))[[1]])
standard.error.from.z <- as.matrix(maxbeta/maxz)
dat <- read.csv("../data/ExprSampleSize.csv.gz",header = TRUE)
rownames(dat) <- dat[,1]
expr.data <- dat[,-1]
expr.sort <- expr.data[rownames(expr.data)%in%qtl.names,]
a         <- match(qtl.names,rownames(expr.sort))
expr.sort <- expr.sort[a,]
exp.sort  <- expr.sort[,-missing.tissues]
colnames(exp.sort) <- colnames(maxz)
standard.error           <- out$strong.s
colnames(standard.error) <- colnames(maxz)
tissue.names             <- colnames(maxz)

To draw the the bar charts, we use the colours that are used by convention used to represent the GTEx tissues in plots.

gtex.colors <- read.table('../data/GTExColors.txt',sep = '\t',
                          comment.char = '')[-missing.tissues,2]

Load the marginal posterior variances.

out <- readRDS(paste("../output/MatrixEQTLSumStats.Portable.Z.coved.K3.P3",
                     "lite.single.expanded.V1.posterior.rds",sep = "."))
marginal.var <- out$marginal.var

Compute effective sample sizes

Compute the effective sample sizes,

\[n_{jeff} = \frac{s_{j}^2}{\tilde{s_{j}^2}}\]

original.var <- as.matrix(standard.error.from.z)^2
size         <- as.matrix(exp.sort)
post.var     <- as.matrix(marginal.var) * standard.error.from.z^2
njeffective  <- size * original.var/post.var
increase     <- njeffective/size

Next, order the tissues by the actual sample size.

samplesize          <- apply(size,2,unique)
sampleorder         <- order(samplesize,decreasing = TRUE)
median.nj.effective <- apply(njeffective,2,median)
median.nj.increase  <- apply(increase,2,median)

Plot effective sample sizes

Plot, for each tissue, the effective sample size, and the increase in the ESS over the actual sample sample size.

par(mfrow=c(1,2))
par(mar=c(5.1,8,4.1,0.1))
barplot(median.nj.effective[sampleorder],cex.names=0.4,las=2,
  col=as.character(gtex.colors[sampleorder]),horiz = TRUE)
title("Median(Nj_effective)",cex.main = 0.8)
par(mar=c(5.1,2,4.1,6))
barplot(median.nj.increase[sampleorder],cex.names=0.4,las=2,
  col=as.character(gtex.colors[sampleorder]),horiz = T,names="",xlim=c(16,0))
title("Median(Nj_effective/Nj_original)",cex.main=0.8)

Expand here to see past versions of plot1-1.png:
Version Author Date
ab91f2e Peter Carbonetto 2018-06-06
6f66a94 Peter Carbonetto 2018-06-06

We see that the ESS values are smallest for tissue that show more “tissue-specific” behaviour (e.g. testis, whole blood), and are largest for coronary artery, reflecting its stronger correlation with other tissues.

Plot effective sample sizes and actual sample sizes

Here we plot the actual sample size and median effective sample size of each tissue, in which the tissues are ordered by their original sample size.

par(mfrow = c(1,2))
par(mar = c(5.1,8,1.1,0.1))
barplot(samplesize[sampleorder],cex.names=0.4,las=2,
        col=as.character(gtex.colors[sampleorder]),horiz = TRUE,
        xlim = c(0,2000))
title("Sample Size",cex.main=0.8)
par(mar = c(5.1,2,1.1,6))
barplot(median.nj.effective[sampleorder],cex.names = 0.4,las = 2,
        col = as.character(gtex.colors[sampleorder]),horiz = TRUE,
        names = "",xlim = c(0,2000))
title("Effective Sample Size",cex.main = 0.8)

Expand here to see past versions of plot2-1.png:
Version Author Date
ab91f2e Peter Carbonetto 2018-06-06
6f66a94 Peter Carbonetto 2018-06-06

Observe that the effective sample sizes are consistently higher than actual sample sizes, primarily due to sharing of information among tissues.

Session information

sessionInfo()
# R version 3.4.3 (2017-11-30)
# Platform: x86_64-apple-darwin15.6.0 (64-bit)
# Running under: macOS High Sierra 10.13.5
# 
# Matrix products: default
# BLAS: /Library/Frameworks/R.framework/Versions/3.4/Resources/lib/libRblas.0.dylib
# LAPACK: /Library/Frameworks/R.framework/Versions/3.4/Resources/lib/libRlapack.dylib
# 
# locale:
# [1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8
# 
# attached base packages:
# [1] stats     graphics  grDevices utils     datasets  methods   base     
# 
# loaded via a namespace (and not attached):
#  [1] workflowr_1.0.1.9000 Rcpp_0.12.17         digest_0.6.15       
#  [4] rprojroot_1.3-2      R.methodsS3_1.7.1    backports_1.1.2     
#  [7] git2r_0.21.0         magrittr_1.5         evaluate_0.10.1     
# [10] stringi_1.1.7        whisker_0.3-2        R.oo_1.21.0         
# [13] R.utils_2.6.0        rmarkdown_1.9        tools_3.4.3         
# [16] stringr_1.3.0        yaml_2.1.18          compiler_3.4.3      
# [19] htmltools_0.3.6      knitr_1.20

This reproducible R Markdown analysis was created with workflowr 1.0.1.9000